Sunday, August 15, 2010

Fall






Supplies Needed
Tube or Image of choice
Scrapkit of choice, I am using a great kit called Warm Fall by Dnscraps
,you can find it here  at  Scrappin Dollars.
Font: Autumn
Drop Shadow of choice.
Mask_351 by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 650 x 650.
New Layer select all copy Fallsplendorpaper 6 and
 paste  into selection deselect.
Apply mask Merge group, duplicate then on original layer
Adjust -Blur-Gaussian Blur Radius-20.

Select Warmfalltreeframe copy paste resize by 75 percent.
Click inside each frame copy paste paper of choice
and any element you wish to use.

I used the following elements.
Warmfallbarque, warmfallship and warmfallsquirrel.
Give these a light Drop Shadow.
Then close out background and mask layers- Merge group.
Select warmfallribonbow 2 copy paste resie by 45 percent -Image Mirror
then place on left side of frame.

Select warmfallhouse copy paste resize by 90 percent.
Select warmfallscarecrow copy paste resize by 70 percent
place behind house, see tag.
Select warmfallwordart copy paste resize by 35 percent
place on top right hand side.
Add your tube of choice. I used the medi-santhia 3 cop paste,
 resize by 75 percent place in front of house
Select warmfallfallsss(leaves) copy paste resize by 90 percent place
 on left side of layer then duplicate - Mirror.
Give all except your mask layers a Drop shadow.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 16 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

Loving Memeories ♥





Supplies Needed

Tube or Image of choice.
Scrapkit of choice, I am using a great kit called In Loving Memory by DDesigns,
you can find it here at Sunflower Scraps Boutique.
Font of choice
Drop Shadow of choice.
Mask_248 by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 650 x 650.
New layer Select all copy paste dda_inlovingmemory_pp4 into selection deselect.
Apply mask merge group.
Select dda_inlovingmemory_element 09 copy paste resize by 28 percent.
Selections Modify expand by 5 new layer copy paste your tube/picture
into selectiond then deselect.
Select dda_inlovingmemory_element 6 copy paste above mask layer
resize twice by 50 percent.
Select dda_inlovingmemory_element 5 copy paste resize by 25 percent.
Using your pick tool move it so it sit near top of frame.
Select dda_inlovingmemory_element 15 copy paste resize twice by 15 percent
place on left side of frame, see tag.
Add a Drop Shadow to all except mask layer.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.
This tutorial was written by Maree (aka Falcon) on 15 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

Saturday, August 14, 2010

Whisper of Promises ♥





Supplies Needed

Tube or Image of choice, I am using the artwork of Unholy Vault
you can find his artwork at MPT
Scrap kit of choice or I am using this great kit Pink Promises by Dorthi's Designs
you can find it at The Creativity Box.
Font: AdineKimberg.
Drop Shadow of choice.
Mask_181 by Weescotslass

Remember to Save Often!!!

Let's begin
Open new image 650 x 650.
Select frame_5 Dorthi copy paste resize by 50 percent twice.
Click with Magic Wand inside frame, selections -Modify_Expand by 4.
Select paper9_Dorthi copy paste Then resize by 50 percent Selections-Invert-Delete,
 move below frame layer.
Copy paste your tube, hit delete, move below frame, then
Selections-select none.Give tube and frame a light drop shadow,

X-out your background layer then Layers - merge visible.
Select Flourish_Dorthi copy paste then resize twice by 45 percent move
above background layer.
Then duplicate - mirror - flip see tag for placement.

Select Bow stitched_Dorthi copy paste resize to fit frame place at top of frame.
Select feather_Dorthi copy paste resize by 35 percent
place bottom right side of frame.
Select Hearts_Dorthi copy paste resize by 75 percent place on feather.
Then Select Staple 4_Dorthi copy paste resize by 65 percent
 place so it sits on both hearts, see tag.
New layer above background selections select all then
copy paste your Paper2_Dorthi into selection.Deselect then
apply mask merge group.
 Duplicate mask then on original layer-
Adjust -Blur-Gaussian Blur 10-Ok.
Give all a drop shadow except Mask layer.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 12 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

Chickalicious ♥







Supplies Needed
Tube or Image of choice, I am using the fantastic artwork of Jamie Kidd
you can find the artwork here at CILM
Scrapkit of choice, I am using a great kit called Chickalicius by Tammy Scraps,
you can find it here at Scrappetizing
Font: Party Script
Drop Shadow of choice.
Mask_148 by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 600 x 600.
Copy paste Chickalicious_frame resize by 75 percent
 click inside with Magic Wand,
Select Chickalicious_paper 19 copy paste, selections invert - delete
 move below frame.
Copy paste your tube hit delete, move it below frame.
New layer above background layer then selection select all then
copy paste Chickalicious_paper 9 deselect
Apply mask-Merge group.
Add your tube copy paste place on right side of layer.
Copy paste Chickalicious_Flower 7 resize by 75 percent
duplicate mirror,  see tag for placement.
I used the following Elements.
Chickalicious-feather copy paste between main tube and frame,
Chickalicious-dress 2 copy paste resie by 85 percent place on left side of frame
Chickalicious-Gift 1 and 2 copy paste resize as needed.place on left side of tube.
Chickalicious-teddy bear copy paste resize by 45 percent
 place on top of single gift box.
Chickalicious herart charm 1 copy paste resize by 45 percent
place on left top side of frame.
Chickalicious-beads on string copy paste resize by 35 percent
place on top of charm on left side, see tag.
Chickalicious-doodle 4 copy paste below mask layer then
resize by 65 percent duplicate-mirror.
Give all except feather and mask an Drop Shadow.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on
Any similarities to this tutorial are purely coincidental
© Maree

Flight of Fantasy ♥


Supplies Needed

I am using the artwork of Jasmine Becket-Griffith
you will find her tubes at CILM
Scrap Flight of Fantasy by Baby Cakes Scraps
you can purchase her kits at Sunflower Scraps Boutique
Font :
Drop Shadow of choice.
Mask_84 by Weescotslass Here
Remember to Save Often!!!

Let's begin
Open new image 750 x 650.
Open new layer then,
Copy paste bcs_paper_six into selection-deselect, apply mask.
Select bcs_frame_three copy paste resize by 55 percent.
Click inside frame with magic wand -expand by 4 new layer copy
 paste bcs_paper_twelve, then move below frame.
Open your tube of choice then copy paste into selection on new layer,
move below frame.
Copy paste bcs_Flourish_A resize as needed then place behind top of frame,
duplicate, miror then flip.
Copy paste bcs_fae_dragon resize by 45 percent twice duplicate
 mirror see tag for placement.
Select bcs_charm copy paste resie by 35 percent place on right side of fram3
 then using your selection freehand tool outline the teardrop shape,
 new layer copy paste bcs-fae into selection.Deselect.
Copy paste bcs_flower_E resize by 23 percent duplicate, place one on bow
 and the other one above the charm, see tag.
Copy paste bcs_humer_two resize by 50 percent twice and
 place on bottom left of frame.
Give all a drop Shadow of choice except your mask.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 9 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

Tuesday, August 10, 2010

Tia's Dreamz ♥



Supplies Needed
I am using the beautiful artwork of Jamie Kidd
 you can purchase her tubes here at Cilm
Scrap Tia's Dream by Lynn Scrappin Emporium Here
Font: LamarPen
Drop Shadow of choice.
Mask_442 by Vix Here
Remember to Save Often!!!

Let's begin
Open new image 600 x 600.
New layer copy paste TDPaper 8 into selection-deselect. Apply mask.
Duplicate layer then merge down.
Copy paste head shot of tube then resize by 50 percent place on left side -
 select Luminance (legacy), duplicate layer then resize by 42 percent
place top right side, see tag.
Add your main tube and place just off center.
Copy paste TD Bow 1 resize to fit bottom of tube, see tag.
I used the following elements
TD Baby Bear
TD Bag
TD Lipstick
TD Swan
Select Preset tool and draw out a rectangle below the bow. I used white foreground and black
background.Now using your selection tool outline the black area
then use these setting for Xfeno Constellation.

Give all except your mask layer a Drop shadow of choice.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 9 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

Forever Love ♥


Supplies needed
Tube of choice I used Ismael Rac you can find him Here
Scrap kit of choice I used Happy Valentine Here
Font of choice

Let's begin
Lets get stared. Open a new cancas 600 X 600. Select frame 2 Copy / Paste as new layer
 resize by 50% add a drop shadow.
With Magic Wand click inside the frem then Selections ?Modify / Expand by 4.
Select paper 2 resize 50%, Copy /Paste. Selections / Invert / Delete / Select None.
 Place under frame and give light drop shadow.
Select Doodle 1 Resize / Duplicate / Image / Mirror.
Duplicate this layer then Layers / Merge / Merge down.
Duplicate the Doodle layer 3 times.Rename them D1,D2,D3.
Click on D1 Adjust/ Adjust/remove noise/Add noise with these settings.


Click on D2 layer and Add Noise / increase to 35. Do the same
with D3 layer and increase Noise to 40.
Open Bow 2, flowers 3, & 4 resize to your liking and copy / paste check my tag for
 placement add a drop shadow. Add your © info & name.

How to Animate Tag.
Open Animation Shop. Click back to PSP X2
Close the D2,D3 layers, click back onto D1.
Edit / Copy Special /Copy Merge. Click on Animation Shop then right click
and paste as a New Animation..
Then click back in PSP Close Out D1 Open D2 making sure you have highlighted it.
Edit / Copy Special / Copy Merged Click back to AS Edit / Paste - After Current Frame.
Back to PSP close out D2 the click on D3 open, Edit /Copy Special / Copy Merged.
Click on frame 2 in AS then Edit / Paste - After current frame.
Then Edit/ Select All Click on View / View Animation. To resize your tag Click Animation / Resize Animation by 75%. Save as a Gif.
Thank you for trying my tutorial, hope you enjoyed it.

This was written by Maree (aka Falcon) on 11 February 2009
 similarity to this tutorial is purely coincidental.

Please do not copy or claim as your own.
©Maree

Saturday, August 7, 2010

Ray of Sunshine ♥



Supplies Needed

I am using the artwork of PinUpToons and can be purchased at CILM
Scrap Yellow and Mellow by Puddicat Creations at Dazzling Scraps
Font: Swan Song
Drop Shadow of choice.
Mask_243 by Weescotslass Here
Remember to Save Often!!!

Let's begin
Open new image 600 x 600.
New layer select all copy paste pdc_paper14 deselect, apply mask.
Copy paste pdc_bling1 resize by 65 percent.
Copy paste pdc_frame 3 resize by 75 percent, click inside with magic wand
copy paste pdc_paper2 into frame - delete.
Add your tube of choice, resize as needed.Select none.
Add pdc_leaves 2 and pdc_flower 12 resize and
place on left side of frame, see tag.
Copy paste pd_ribbon 1 resize by 45 percent place on top of frame.
Select pdc_ladybug1 paste resize by 35 percent -Free Rotate-
 angle 45 degrees left, place on top right side of frame.
Copy paste pdc_well resize as needed place on left side of frame
.Copy pdc_animal paste resize as needed place near well.
Copy paste pdc_flower 7 resize by 50 percent then duplicate
see tag for placement.
Copy paste pdc_grass1 above your mask layer resize if needed.
Give all a light drop shadow except your mask layer.

Add your Artist © and your nameCopy then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 7 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

S is 4 Spring ♥









Supplies Needed

I am using the artwork of PinUpToons
these can be purchased at CILM
Scrap Spring in The Air by Artlor Designz Here
Font: Dollhouse 
Drop Shadow of choice.
Mask_12 by Weescotslass Here
Remember to Save Often!!!

Let's begin
Open new image 600 x 600.
New layer select all copy paste AD-SITA paper11 into selection.
 Apply mask merge group. Duplicate layer.
Copy paste AD-Frame 3 resize by 75 percent. Click inside with magic wand then copy
paste AD-SITA paper 11 hit delete then move layer under frame. Deselect.
Copy paste your tube resize if needed.
Copy paste AD-Balloons 3,4,and 5 resize by 45 percent place on left side of frame,
Copy pste AS-HeartRibbon 3 resize by 65 percent see tag for placement.
Select AD-Wordart 1 copy paste reise by 50 percent place on right side
of  frame near ribbon.
Copy paste AS-Flowers 1,2,3,4, and 5 resize as needed place at bottom of frame.
Select AD-Butterflies 1 and 3 resize as needed see tag for placement.
Give all a Drop Shadow of choice expect your mask layer.
Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 7 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

Colors of Fall ♥






Supplies Needed
I am using the artwork of PinUpToons and can be purchased at CILM
Scrap Colors of Fall by Sleek & Sassy
and can be purchased at Scrappin Dollars
Font: Elegant
Drop Shadow of choice.
Mask_84 by Weescotslass Here

Remember to Save Often!!!

Let's begin
Open new image 600 x 600.
New layer slect all copy paste paper1 into selection, deselect. Apply Mast.
Copy paste Swirly Ivy_2 resize to fit. Duplicate Image Mirror duplicate again
then Image Free rotate 90 left, see tag for placement.
Copy paste resie Bow_1 place on top corner of Ivy then duplicate-mirror.
Copy paste Sun resize as needed and place behind Ivy on left side of layer.
Add your tube, resize as needed.
Copy paste resize Leafs 1,2,3,4 and 5 place around your tube.
I have add these other elements so just copy paste then resize as needed.
Pot 1
Snail 2
Beaded string
Bee
Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.
This tutorial was written by Maree (aka Falcon) on 6 August 2010
Any similarities to this tutorial are purely coincidental
© Maree

Fairy Dreamz ♥






Supplies Needed
I am using the artwork of Caron Vinson these tubes can be purchase at CILM
Or tube of choice
Scrap Magical Fantasy by Angels Designz  this can be purchased at Dazzling Scraps
Font: LD Italic
Drop Shadow of choice.
Mask_84 by Weescotslass Here
Remember to Save Often!!!
Let's begin
Open new image 600 x 600.
New layer Selections-select all copy AD_Paper12 paste into selection. Deselect.
Apply mask merge group.
Select element 69 copy paste resize as needed.Using Magic Wand click inside circles and copy
paste paper 5, Invert, delete. Move below frame.
Copy and paste tubes of choice resize if needed. Move below frame, give frame and tube a drop
shadow then close background and mask layers then Merge visible.
Copy paste AD_Element 50 resize as needed place on bottom right side of layer.
Copy paste AD_Element 51 resize by 15 percent place on left side of pond.
Copy paste AD_Element 31 resize by 23 percent see tag for placement.
Copy paste AD_Element 80 resize by 15 percent place in center above frame.
Copy paste AD_Element 32 resize by 28 percent see tag for placement.
Add AD_Element 56 resize resize by 12 percent place near frame.
Add your main tube place on top of mushroom.
Give all a drop shadow except mask layer. Now onto animating your tag.
Add your Artist © and your name then crop and save if you don't wish to animate.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

Animation.
1. Click on your butterfly layer and use these settings with Add Noise.
2. Copy paste as new animation in AS.
3. Click undo in Psp add noise 35 this time. Copy paste after current frame in AS.
4. Repeat no3 again increasing Noise to 40.
5. Save as a gif if need resize animation.

This tutorial was written by Maree (aka Falcon) on 6th August 2010
Any similarities to this tutorial are purely coincidental
© Maree