Friday, December 31, 2010

Hey Hey 2 The New Year ♥



Supplies Needed

Tube I'm using the artwork of Keith Garvery, you find it at MPT
Scrapkit by Heart of Essence called - New Year ,
you can find it Here.The creativity box
Font:Anglia
Drop Shadow of choice.
Mask wsl_84 by Weescotslass

Remember to Save Often!!!

Let's create

Open layer 650 by 650 flood fill #ffffff
Open 02he-newyear-paper open Material properties click on Pattern and find.
using your Preset tool-draw out a circle,
then - Objects-Align-center in canvas-deselect(trl+D).
Duplicate layer then resize by 115, flood fill with white
then give a drop shadow 2/2/50/10.
Adjust-Add noise 50 Guassian tick Monochrome box-ok.
Click inside orignal layer copy paste your close-up tube
Selections-Invert-Delete, deselect.
Open 02he-newyear-elements paste above background layer.
Open 04he-newyear-elements resize 45 percent place top right corner.
Open 13he-newyear-elements resize 38 percent move to right of layer
Open 08he-newyear-elements resize 32 percent place at top of circle.
Open 47he-newyear-elelment resize 28 percent place lower edge of cirlce.
Then using eraser clean up the edges to give a smooth finish, see tag.
Open 18he-newyear-element resize 38 percent place a t bottom of circle.
Add your main tube place to left of circle.
Give all a Drop Shadow.
Add new layer above background layer. Flood fill with @000000
Apply your mask-merge group.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

If you wish to email me your creation, I then can show off your wonderful creations.
Thank you for using my tutorial.

Written by Maree (aka Falcon) on 31 December 2010
Any similarities to this tutorial are purely coincidental
© Maree(aka Falcon)

Shifting Wheels of Time




Supplies Needed


Tube I'm using is the artwork of Ray Leaning, you find it Here mpt
Scrapkit by Digicats (& Dogs) called Shifting Gears-PTU ,
you can purchase it Here.
Font:
Drop Shadow 2/2/50/5.
Mask wsl_84 by Weescotslass
Remember to Save Often!!!

Let's create

Open new image 650 x 650 flood fill with #000000.
New layer flood fill with a Gold Gradient color. Apply mask-merge group.
New layer using your Selection tool draw out a large circle,
Open DCD_ShGe_Paper03 paste into selection, Deselect.
I then using Text tool wrote Happy New Year around
the out side of circle this is optional.
Open DCD_ShGe_Fireworks2,3 and 4 paste behind circle layer and arrange,
Open DCD_ShGe_Gears 03 image-mirorr, resize 65 percent move to the right.
Open DCD_ShGe_Gears 01 resize 50 percent move to the left.
Open DCD_ShGe_Cog01 resize 45 percent place above gears 01.
Open DCD_ShGe_New Years Clock 02 resize 75 percent move top left.
Open DCD_ShGe_Curly Bow resize 35 percent move top of cirlce,
Open DCD_ShGe_Ribbon 05 resize 65 percent place lower right side of gears.
Open DCD_ShGe_2011 WA02 resize 55 percent place in center of cirlce, see tag.
Open your tube place give a Drop Shadow.
Open DCD_ShGe_Chanpagne02 resize 45 percent move to the right.
Open DCD_ShGe_Metallic Flute resize 32 percent move to right.
I did not apply Drop Shadow to the fireworks and
all other layers have a Drop Shadow.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.Gears 03 resize

If you wish to email me your creation, I then can show off your wonderful creations.
Thank you for using my tutorial.

Written by Maree (aka Falcon) on 31 December 2010
Any similarities to this tutorial are purely coincidental
© Maree(aka Falcon)

Wednesday, December 22, 2010

A Wonderful Christmas Time ♥

Supplies Needed


Tube I'm the artwork of PinUpToons, you willfind it Here
Scrap kit by Faba-PTU called White Christmas,you can find it Here.
Font: of choice
Drop Shadow of choice.

Remember to Save Often!!!

Let's Create


Open new image 700 x 550 we will resize later.
New layer select all open Faba_white christmas_pp10 paste into selection-deselect.
Open Faba_white christmas_El2 (11) resize 53 percent.
Open Faba_white christmas_El1 (14) resize 38 percent place below frame layer.
Open Faba_white christmas_El2 (20) resize 32 percent Image - Mirror
Open Faba_white christmas_El1 (4) resize 28 percent place at bottom of frame.
Open Faba_white christmas_El2 (32) resize 28 percent place on left side of branch.
Using your Eraser Tool erase part of the branch in front of green ribbon,
then the silver ribbon on branch.
giving the effect its behind the green ribbon.
Open Faba_white christmas_El2 (19) resize 28 percent place
right side of branch using your Eraser carefully
remove part of branch, see tag.
Open Faba_whitechristmas_El2 (3) resize to fit bottom of frame.
Add your tube below frame layer resize if needed.
Open Faba_white christmas_El shaded (13) resize 43 percen
t place fright side of frame.
Open Faba_white christmas_El2 (5) resize 21 percent
place on lower right side of frame.
Open Faba_white christmas_El1 (29) resize 16 percent place on right of frame.
Open Faba_white christmas_El1 (35) resize 13 percent
place on lower left side of frame.
Give a light Drop Shadow.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.


If you wish to email me your creation, I then can show off
your wonderful creations.
Thank you for using my tutorial.
Written by Maree (aka Falcon) on 22 December 2010
Any similarities to this tutorial are purely coincidental

© Maree(aka Falcon)

Magical Winter ♥


Supplies Needed

Scrap kit by Dnscraps called Magic Winter Snow
you can purchase it Here.
Drop Shadow of choice.
Mask_13 by Sharlimar Designs Here

Remember to Save Often!!!

Let's create
Open new image 650 x 650 fill with #dde0eb.

New layer select all open magicwintersnowpaper 14 paste into
selection apply mask, merge group.
Duplicate.Give the original layer only a Drop Shadow 2/2/50/3.
Open magicwintersnowballs resize 65 percent place in frame see tag.
Open magicwintersnowflower resize 35 percent place on top left corner of frame.
Open magicwintersnowleaves resize 28 percent duplicate,
arrange behind flower, move them around till your happy with placement.
Open magicwintersnowelf resize 52 percent Image-mirror,
place right lower edge of frame,
Open magicwintersnowtree resize 55 percent paste below snowball layer.
Open magicwintersonowder Image mirror resize 55 percent place left of frame.
Open magicwintersnowtreeglitter paste above snowball layer.
Open magicwintersnowribbonbow resize 90 percent Image-mirror,
paste below snowleaf layer.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

If you wish to email me your creation,
so I can show off your wonderful creations.
Thank you for using my tutorial.

Written by Maree (aka Falcon) on 22 Decenber 2010
Any similarities to this tutorial are purely coincidental
© Maree(aka Falcon)

Fairy Dreamz ♥


Supplies Needed


Tube I'm the artwork of Rachel Tallomy, you can find er artwork Here


Scrapkit byDestiny Scrap Designs - My Fairytale ,you can find it Here.

Font: of Choice

Drop Shadow of choice.

Mask_19 by Suzzanna Here



Remember to Save Often!!!




Let's create


Open new image 650 x 650 flood with #ffffff.

New layer select all - open DSD_MyFairytale_Paper_01 paste into selection,

apply mask, merge group.

Duplicate on orginal layer -Guasuain Blur 10.

Open DSD_MyFairytale_Element_28 resize 65 percent move to side of mask

duplicate-Image-Mirror.

Open DSD_MyFairytale_Element_13 resize 65 percent center on mask.

Open DSD_MyFairytale_Element_05 resize 75 percent place above sidewalk

Add your tube resize if needed. I placed mine sitting on edge of walkway.

Open DSD_MyFairytale_Element_12 reisze 75 percent Image-Mirror,

place on right side of layer

Open DSD_MyFairytale_Element_08 resize 75 percent move

around till your happy with placement.

Open DSD_MyFairytale_Element_10 resize 55 percent Image-mirror,

place on left of layer.

Open DSD_MyFairytale_Element_14 resize 65 percent

Image-mirror move to left of layer, above chest.

Give all a Drop Shadow 2/2/50/5 except your cloud and mask layers.


Add your Artist © and your name then crop and save.

This is only a guide and feel free to use any other element you wish.

Most of all have fun creating.

If you wish to email me your creation, I then can show off

your wonderful creations.

Thank you for using my tutorial.

Written by Maree (aka Falcon) on 23 December 2010

Any similarities to this tutorial are purely coincidental

© Maree(aka Falcon)

Child of The Night ♥



Supplies Needed

Tube I'm using the artwork of Jasmine Becket-Griffith,
you can purchase from Here.

Scrapkit byDestiny Scrap Design called Children of the Night,
you can find it Here.

Font: Segoe Script
Drop Shadow of choice.
Remember to Save Often!!!

Let's create


Open new image 650 x 600.

Select All copy paste into selection DSD_ChildrenOfTheNight_Paper_9.
Deselect.
Open DSD_ChildrenOfTheNight_Element_11 resize to fit.
Open DSD_ChildrenOfTheNight_Element_29 resize 46 percent.
Open DSD_ChildrenOfTheNight_Element_02 resize 75 percent
place top right corner.
Open DSD_ChildrenOfTheNight_Element_26 move to top left corner.
Open DSD_ChildrenOfTheNight_Element_21 move to left of layer.
Open DSD_ChildrenOfTheNight_Element_09 placein center of layer.
Open DSD_ChildrenOfTheNight_Element_24 resize 65 percent,
moveso the center light is in lamp, see tag.
Open DSD_ChildrenOfTheNight_Element_36 resize 45 percent
place on fence.
Open your tube/s I place one sitting on the fence and
the other on right side of layer.
Open DSD_ChildrenOfTheNight_Element_12 place top of layer, see tag.
Open DSD_ChildrenOfTheNight_Element_41 resize 55 percent,
move it around till happy with placement around the ribbon.
Using your eraser tool erase parts of the ribbon that are overhanging.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Give all a light drop shadow. then Merge Flattened. Image-Copy.
Image add Border Select a color from your tube.
Tick the Symmetric box then place 1 in boxes.
Select Add Borders again this time with another color from tube.
This time use 3.
Add Border again this time with using 1 with the first color used.
Image-Add Border select any color width 25.
Using Magic wand click inside then paste your picture into frame.
Effect-Reflection effects-Kaleidoscope play with the setting
till you are happy with the effect,
do this by playing with the dice Randomise button.
Effects-3D-Inner Bevel with these setting:


Most of all have fun creating.
If you wish to email me your creation, I then can show off
your wonderful creations.
Thank you for using my tutorial.
Written by Maree (aka Falcon) on 21 December 2010
Any similarities to this tutorial are purely coincidental
© Maree(aka Falcon)

Saturday, December 11, 2010

Joy To The World ♥



Supplies Needed

Scrap kit by WhackyWinnie Designz is PTU Christmas Time ,
you can find it Here.
Font: FreeStyle Script
Drop Shadow of choice.
Mask of choice circle on is best.
Remember to Save Often!!!

Let's create

Open new image 700 x 550.
Select Rectangle Tool using these settings draw out a rectangle.


I used gold-foreground for the border and X- out the background color.
Duplicate twice rename layers F1,2,3.
Image-FreeRotate F1 left 18 degrees F3 right 18 degrees.Closeout background layer merge.
Click inside frames with magic wand.
Open WWW-CT_Paper11 past, Selection-Inver-hit delete,move below frame.
Open WWW-CT_Snowman1,2,3 resize and place in frames.Give them a light Drop Shadow.
X-out background layer merge all.Open background layer.
New layer flood fill with #bc994d, I used a circle mask.merge group.
Then apply Xfenoconstellation with these settings:
Open WWW_CT_Holly resize 23 percent duplicate place where frames join.
Open WWW_CT_Bow1 resize 15 percent place on center frame.
Open WWW_CT_Tree1 resize 35 percent place on right of frame.
Open WWW_CT_Box3 resize 16 percent place in front of tree.
Open WWW_CT_NPSign resize 35 percent place on left of frame.
Open WWW_CT_SantaSleigh resize 22 percent, Image-Mirror.
Open WWW_CT_PolarBear1 resize 24 percent place near sleigh.
Open WWW_CT_Penguin1 resize 56 percent place front of sleigh.
Open WWW_CT_Candle1 resize 28 percent place in center of mask, see tag.
Open WWW_CT_Box2 resize 23 percent place on left of bear.
Give all a Drop shadow 2/2/50/5
Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

If you wish to email me your creation, I then can show off your wonderful creations.
Thank you for using my tutorial.

Written by Maree (aka Falcon) on
Any similarities to this tutorial are purely coincidental
© Maree(aka Falcon)

Wednesday, December 8, 2010

All Wrapped Up ♥




Supplies Needed
Tube I'm the artwork of Ismael Rac, you find it Here
Scrapkit by Rebellious Scraps is PTU Christmas Cheer ,you can find it Here.
Font: Cooper Std Black
Drop Shadow of choice.

Remember to Save Often!!!

Let's begin

Open new image 700 x 700.Fill with #0000000

Open frame 5 resize 90 percent, click inside with Magic wand.
Open paper 10. Selections-Invert-Delete, move below frame.
Open christmas tree 3 resize 87 percent move to center of frame.
Open your tube resize if needed place on right of frame.
Open present 3, 7 and 8 resize as needed place at bottom of tree.
Open toys resize 28 percent Image-mirror place on bottom left of frame.
Open Candycane resize 20 percent place on left of toys, see tag.
Open bells 2 resize 23 percent place top left corner of frame.
Open ornaments chain resize 32 percent place top right corner of frame.
Open deco resize 24 percent place on top of bells tube,see tag, then duplicate
Image-Mirror, adjust if needed.
Open santa and sleigh resize 23 percent place above tree.
Give all layers a Drop shadow 2/2/50/5.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

If you wish to email me your creation, I then can show off your wonderful creations.
Thank you for using my tutorial.

Written by Maree (aka Falcon) on 8th December 2010
Any similarities to this tutorial are purely coincidental
© Maree(aka Falcon)

Sunday, December 5, 2010

Snow Snow n more Snow.... ♥





Supplies Needed

Tube I'm using,Tony Tzanoukakis you purchase Here
Scrapkit by Sweet Occasion Designs called Let it Snow,Let it Snow PTU, Here.
Font: Candlemas
Drop Shadow 1/1/50/4
VDL Adrenaline-SnowScape
Snow Here
Remember to Save Often!!!
Let's create

Open new image 700 x 600.
Open aos frame 6 resize 75 percent click inside with magic wand.
Open aos paper10, new layer paste into selection, deselect.
Click on frame layer using Snowscape with these settings:

LovelyFlowers_Flower5_Scrape and Tubes resize 75 percentmove to right duplicate, mirror.
OPen snowmaan2 reisize 26 pecent place left side of frame,give a drop shadow.
Open snowman3 mirror then resize 25 pecent place lower right side.
open snowTrees_Tree2_Scrap and tubes resize 75 percent place in center of frame.
Open tube resize to fit then move behind tree, see tag.
Open snowman* resize 73 percent plae to right of tree,see tag.
Open button 2 resize 38 percent, duplicate-mirror place top corners.
Open DRA BOW 6 resize 35 percent place on top of button, duplicate-mirror.
Give all a drop shadow.
If you wish to animate please continue.
Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

Open Animation Shop
In psp X-out all layers except background and paper layers,
copy paste into AS as new animation, duplicate it 4 times (ctrl+L)
,you now should have 5 frames.
Open your snow using Ctrl+A to select all copy paste Into selected frame.
Back in psp open all layers then X-out background and paper layers
Copy merged-copy special
in As paste as new animation. Copy paste into selection.
Save as a Gif.

If you wish to email me your creation, I then can show off your wonderful creations.
Thank you for using my tutorial.

Written by Maree (aka Falcon) on
Any similarities to this tutorial are purely coincidental
© Maree(aka Falcon)

Thursday, December 2, 2010

No Peeking ♥

Supplies Needed
Tube of choice,I'm using ©Wendy Gerber, from MPT 
Scrapkit by Puddicat Creations called Christmas Memories you can purchase it Here.
Font:of choice.
Drop Shadow 2/2/50/5.
Remember to Save Often!!!

Let's begin

Open new image 650 x 650.
Open pdc_fireplace  resize 65 percent.
Open pdc_bownpoinsettea1 resize 34 percent place on top corner then duplicate,Image-mirror.
Open pdc_candel1 resize 38 percent  duplicate, Image-mirror.
Open pdc_wreath1 resize 39 percent place center of fireplace.
Open pdc_christmastrees2 resize 75 percent place right side.
Open pdc_candycanes1 resize 36 percent place on left side of fireplace.
Open pdc_gingerhouse resize 42 percent place right side of tree.
Open pdc_bear1 resize 39 percent place in front of tree.
Open pdc_gift4 resize 37 percent place left side of tree.
Give them all a Drop Shadow 2/2/50/5.
Open pdc_wordart1 resize 65 percent then using your Pick tool straighten it up.
Duplicate click on original layer Adjust-Blur-Gaussian blur 20-click ok.
On duplicated layer Adjust - add/remove noise- Uniform-Noise 45-Monochrome ticked-click ok.
Merge layers visible then resize 95 percent.
Add your tube give a light Drop shadow.
Open pdc_frame adjust frame to fit using pick tool, give a drop shadow to frame.
Using your Selection tool draw a square around the frame.
Open pdc_paper7 new layer paste into selection -deselect. Move below merged layer and frame.
Open pdc_bell1 resize 39 percent give a light drop shadow,duplicate - Image-Mirror.
Open pdc_bow1 resize 32 percent place right bottom of frame, give a drop shadow.
Open pdc_bow2 resize 32 percent place left bottom of frame, give a drop shadow.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

If you wish to email me your creation, I then can show off your wonderful results.
Written by Maree (aka Falcon) on 30 November 2010
Any similarities to this tutorial are purely coincidental
© Maree

Wednesday, November 24, 2010

CandyCane Babe ♥




Supplies Needed
 I am using the fantastic artwork of  Arthur Crow you can find  his artwork here at MPT
Scrap kit  I am using called  Crystalesx Christmas 2010 you can find it MPT.
Font:Minion Pro SmBd
Drop Shadow of choice.
Mask wsl_328 by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 650 x 650.
Foreground color set to #acf4b2 Background I used paper04, 
then set your Ellipse tool with these settings.
Draw out a circle convert to a raster layer, using Magic Wand click on outside of circle
(green section) then Adjust- Add/Remove Noise - Uniform-Noise 45
 click OK.Deselect.Ctrl+D.
Add your tube, I also used the flower swag that came with the tube, place it at bottom of circle.
Select cgd_christmas2010 bow 1 copy paste resize 45 percent place top right side of tube.
Open cgd_christmas 2010 mouse in a stocking 01 copy paste resize 32 percent . 
Then Image-Mirror place on right side of flower swag.
Open cgd_christmas candycane tag 01 and 02. Copy paste resize both 29 percent 
place around outside of circle, see tag.
Open cgd_christmas 2010 elf 03 copy paste resize 25 percent place left  of circle near the center
New layer select all copy paste cgd_christmas 2010 paper03 then apply Mask - Merge group.

Give all a Drop Shadow 2/2/50/5.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 23 November 2010.
Any similarities to this tutorial are purely coincidental.
© Maree

Give Thanks ♥


Supplies Needed
I am using the fantastc artwork of Elias Chatzoudis   you can purchase  the artwork here MPT
Scrap kit I am using a great kit called Thanks Giving, you can find it here.
Font:Footlight
Drop Shadow of choice.
Mask wsl_285 by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 700 x 700.
New layer select all copy paste CHC_GiveThanks_paper6 into selection-select none.
Apply mask then merge group.
Select your tube copy paste on left side.
Open CHC_GiveThanks_element1 copy paste resize 15 percent place on lower right side.
Copy pasteC HC_GiveThanks_elements- Pumpkin-grapes-leaves-nuts and corn resize 
and place in front of the basket element.
 I duplicated the corn twice and placed them at an angle using the Pick tool.
Copy paste CHC_GiveThanks_turkey resize 13 percent place on top of basket element.
Copy paste CHC_GiveThanks_curlyrope resize 14 percent move to top of mask circle then dplicate
Open CHC_GiveThanks_Sign1 copy paste resize 12 percent place at top of ropes.
Select CHC_GiveThanks_Flowerbow1_DS copy paste resize 18 percent 
place at top of sign to hide hooks.
Open CHC_GiveThanks_Leaf 1,2 copy paste resize then place around the mask.
Give a Drop Shadow 2/2/50/5 to all.

Add your Artist © and your name then crop and save. 
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 24 November 2010.
Any similarities to this tutorial are purely coincidental.
© Maree

Thursday, November 18, 2010

Keep Dreaming ♥




Supplies Needed
Tube or Image of choice, I am using the fantastic artwork of Cedric Poulat 
you can find  the artwork at CILM.
Scrapkit of choice, I am using a great kit called Keep Dreaming by Flipp Designs,
you can find it here.
Font: Sudestada
Drop Shadow of choice.
Mask wsl_84 and 212 by 
Remember to Save Often!!!

Let's begin

Open new image 700 x 700.
New layer select all copy paste paper9 aply mask wsl_212, merge group.
Click inside with Magic wand new layer copy paste paper 9 try and
 match up the timber slats, move bleow mask.
Copy paste el62 resize by 23 percent. Add your tube then duplicate move this layer
 above frame element. Using your eraser, erase any parts outside the frame see tag..
Copy paste el_17 resize  21 percent place bottom of mask..
Copy paste el_55 resize 25 percent, duplicate Image-Mirror, move both to 
the top of the fence see tag.
Copy paste el-44 resize 21 percent duplicate then Image-Mirror move to the side of mask.
Copy paste el_43 resize 22 percent move to bottom left.
Open WA_1 copy paste resize to fit top of mask.
Copy paste el_09 resize 6 percent then using your pick tool move it so it
 placed at an angel on books.
New layer copy paste paper6 apply mask wsl_84, merge group.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 19 November 2010
Any similarities to this tutorial are purely coincidental
© Maree

Wednesday, November 17, 2010

Reflections of My Soul

Supplies Needed

Tube or Image of choice, I am using the beautiful artwork of Zindy Neilson
 you can find  the artwork here
Scrapkit of choice, I am using a great kit called Soul Catcher by Lynn at Scrappin Emporium,
you can find it here.
Font MyDearWatson
Drop Shadow of choice.
Mask wsl_248 by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 600 x 600.
New layer copy paste paper 10 then apply mask.
Open frame 3 copy paste Image-Mirror, using Magic wand click inside frame
 and add your tube.Selections-Invert-hit Delete, move below frame.
Copy paste lace place at bottom of frame then using yourPick tool resize to fit frame.
Copy paste flower 4 resize 55 percent, move toleft of frame.
Copy paste flower 1 resize 45 percent move to side of flower 4.
Copy paste flower 5 resize 50 percent move to right of frame.
Copy paste candle resize 45 percent place between flowers, see tag.
Copy paste label heart resize 38 percent place top of frame right side.
Copy paste Butterfly 4 resize 35 percent place top of frame above.
Give all a light Drop shadow of choice. 

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 12 Novemeber 2010
Any similarities to this tutorial are purely coincidental
© Maree

Saturday, November 13, 2010

Ivory Dreams ♥




Supplies Needed
Tube or Image of choice.

Scrapkit I am using a great kit called Ivory Rose by Lynn of Scrappers Emporium
,you can find it here.
Font: Kunstler Script
Drop Shadow of  choice
Mask_84 by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 650 x 650.

Open Ivory rose frame 3 copy paste, with Magic Wand click inside frame
 Selections-Modify-Expand by 4then copy paste Ivory Rose paper 6.
 Selections-Invert-hit delete, move below frame layer.
Open Ivory rose dress stand copy paste resize 35% lace on right side of frame.
Open Ivory rose ballet shoes copy pste resize 25% place left top of frame.
Open Ivory rose bow 1 copy paste resize 38% place above ballet shoes, see tag.
Open Ivory rose fan copy paste resize 25% position bottom of frame left side.
Open Ivory rose coursage copy paste resize 28% place center of fan.
Add your tube now, I used the poser that was included in kit.Resize 76%
Open Ivory rose letter copy paste resize 27% position near hand.
Then using eraser tool with these settings.
Carefully erase till you have the thumb showing, see tag.
Open Ivory rose deco copy paste resize 75% position so top is showing
over frame then duplicate-Image-mirror.

New layer select all copy Ivory rose paper 7 paste into selection.
Apply mask then merge group.Duplicate layer twice.

Give all a Drop Shadow 2/2/50/5 except your mask layers.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.


Animation Shop

Open AS then click back to psp
on 1st mask layer apply these settings

use again on 2/3 mask layers hitting the random seed button.
Now close mask layer 2/3 then
Edit-copy special-copy merged.
right click in As paste as new animation.
Repeat this again for the other 2 mask layers pasting after current frame.

This tutorial was written by Maree (aka Falcon) on 3 November 2010.
Any similarities to this tutorial are purely coincidental

Wednesday, November 10, 2010

Speed Demons ♥




Supplies Needed
Tube/s, I am using the fantastc artwork of Keith Garvey you can find  the artwork here at MPT
Scrap kit  I am using is So Punky by Rebellious Scraps,you can find it here.
Font:Agency FB 
Drop Shadow of choice.
Mask_Halloween 12  by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 650 x 650.

Select frame 1 copy paste resize 85 percent
Click inside frame with Magic Wand, select  paper 10 copy paste 
Selections-Invert-Delete move below frame layer.
Select wire copy paste above frame layer.
Select skull 2 copy paste resize by 78 percent move to top of frame.
Select handcuffs copy paste resize 45 percent place at top of frame 
then select Bow1 copy paste resize 38 percent place above handcuff.
Select motor cycle copy paste place at bottom of layer.
Add your selected tube/s place on either side of cycle.
I add elements cuff and zippo, but feel free to add any other element you want to.
Add a new layer then select Paper 5 copy paste paper4 as background.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 31 October
Any similarities to this tutorial are purely coincidental
© Maree


Monday, October 18, 2010

Ghosty Halloween ♥



Supplies Needed
Tube or Image of choice, I am using the fantastc artwork ofRene' Kunert
you can purchase the artwork at MPT
Scrap kit I am using a kit called Happy Halloween by Tracey.F,Designz,
you can find it here.
Font: Haunting Attraction
Drop Shadow of choice.
Xfeno 2 Burnt Edges
Remember to Save Often!!!

Let's begin
Open new image 650 x 650.
New layer flood fill with #000000 then use Xfeno 2-BurntEdges with these settings'
Then reduce the opacity to 75.
Select TracyFDesignz-HappyHalloween-web3 copy paste.
Select TracyFDesignz-HappyHalloween-Hauntedhouse copy paste center it.
Select TracyFDesignz-HappyHalloween-gravestone2 copy paste
 resize 43 percent move to bottom left.
Select TracyFDesignz-HappyHalloween-Moon1 copy paste under hauntedhouse layer.
Using your Pick Tool make it the size of the orange moon.
Select TracyFDesignz-HappyHalloween-Bats2 copy paste
resize 65 percent place at top of layer.
Select TracyFDesignz-HappyHalloween-Pumpkins1 copy paste resize 43 percent
place in front of gravestone.
Select TracyFDesignz-HappyHalloween-Bag1 copy paste resize 38 percent
 place on right lower side.
Select TracyFDesignz-HappyHalloween-Mummy copy paste place just
off center to the right, see tag. Lower the Opacity to 70.
Add your tube and place near the Mummy.
Select TracyFDesignz-HappyHalloween-Candlestick copy paste resize 45 percent
.Place near your tube out-streched hand then using your Freehand Selection tool
 out line the flames(hold down the shift key to
outline the other 2 flames).
Then apply these settings using Eye Candy nature-Fire:

Add your Artist © and your name then crop and save if you don't wish to animate.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

Open Animation Shop
Now Hit Ctrl+D to deselect then we will copy and paste into AS below .
1.In Psps Edit - Copy Special - Copy Merged,
 click into AS paste as new animation.
2.Back in Psp click undo twice then repeat above with fire this time
 hit the Random Button once.
3.Repeat 1 and 2 again. Check your animation then save as a Gif.

This tutorial was written by Maree (aka Falcon) on 18 October 2010
Any similarities to this tutorial are purely coincidental


Friday, October 15, 2010

Last Summer ♥






Supplies Needed
Tube or Image of choice, I am using the fantastc artwork of Anna Marine
you can find her artwork at  CILM
Scrapkit I'm using is a great kit called Remember Last Summer by Bastel Galaxy,
you can find it here.
Font: Herencia
Drop Shadow of choice.
Mask_83 by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 600 x 600.
Select frame02_BG_RlS copy paste center tube.
Add your tube below frame, move tube so the head is just above the frame.
 Using your eraser tool carefully erase part of the tube to bring the frame into view.
Select abor_BG_Rls copy paste below frame then move to left top, see tag.
Select hammock_BG_Rls copy paste resize 85 percent move
 below frame to the top right.
Selectt birdbath_BG_Rls copy paste place bottom right side of frame.
Select bow11_BF_Rls copy paste on right top of frame resize 45 percent.
Select flower06_BG_rLS copy paste resize 55 percent
 duplicate 4 times postion them around the frame, see tag.
Select beachhat02_BG_Rls copy paste resize 85 percent place at bottom of tube.

Select butterfly 01 & 04 _BG_Rls copy paste resize both 32 percent
move them around till your happy.
New layer select all copy paper12_BG_Rls paste into selection then apply mask.
Add a Drop Shadow, I used 2/2/50/5.

Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 16 October 2010
Any similarities to this tutorial are purely coincidental


Thursday, October 14, 2010

Autumn Fantasy ♥



Supplies Needed
Tube of choice.
Scrap kit Autumn Fantasy  by Crystals Creations  you can find it here .
Mask_330 by Vix
Animations Shop
Drop Shadow of Choice
Remember to save often!!!

Let's Begin

Open new image 650 x 650.Fill with white.
New layer copy paste Paper 17 into selection-deselect apply mask merge layers.Duplicate.
Select frame 2 center on layer using Magic Wand click inside all 3 frames
,hold down shift key whislt clicking in each frame,
Select Paper 14 copy paste Selections - Invert - hit Delete, move below frame layer.
Click in 1 st frame with Magic wand then select an element copy paste, new layer then paste into selection-deselect move below frame layer.
Repeat this with the next 2 frames I used elements, pumpkin, mushroom 1, squirrel.
Move them below frame layer.
Select Spray element copy paste then Image - Free Rotate - 90 degrees right, duplicate - flip,
move below frame
Select butterfly 2 copy paste resize by 35 percent duplicate, see tag for placement.
Select wordart Autumn copy paste move to bottom of layer, see tag.

Add your Artist © and your name.If you dont wish to Animate the tag then crop save as png.
This is only a guide feel  free to use any other element you wish.
Most of all have fun creating.


Open Animation Shop. 
Click back to Psp,click on wordart layer 
Adjust Add/RemoveNoise with these settings:


click ok.
Copy copy merged, Click in AS and paste as New Animation.
repeat above  twice more and each time  increase the setting to 40 then 45
.Pasting after current frame.
Save as a Gif and your done.


Thank you for trying my tutorial. I would love to see your results.
This tutorial was written by Maree (akaFalcon)on 15 October 2010.
Any similarities to this turtorial are purely  coincidental.





That Erie Feeling ♥



Supplies needed

I an using the artwork of Anna Marina you can purchase her tube/s at CILM
Scrap kit is Everything Erie by Jen of Sleek n Sassy you can find her kit here
Font:: Chiller
Template by Lovey and you can find it here.
Please leave some love.

Remember to save !!!!

Let's Begin

Open your template Shift+D close the original.
Delete the copywrite layer.
Select the gladoval layer Click inside with Magic Wand select haunted house copy,new layer paste into selection-deselect.Merge down. 
Click on 3 grad layer click inside first square with Magic wand new layer select Eyeballs
copy paste into selection-deselect.
Click inside 2nd square with Magic Wand then on layer above paste Kneeling Skeleton
  into selection. Repeat with last square
using Spell Book 2 . Merge layer down.
Select shape1 layer click inside with Magic wand select Paper 13 new layer paste into selection-deselect.
Select Shape 2 layer click inside with Magic wand select Paper12 new layer paste into selection-deselect.
Select Shape 3 layer click inside with Magic wand select Paper11 new layer paste into selection-deselect.
Select shapefilter layer click inside with Magic wand select Ghost grave new layer paste into selection-deselect.
Select Crow 2 copy paste resize 43 percent - mirror place on right side.
Add your tube place on left side see tag.
New Layer select all copy paste Paper 7 into selection-deselect.
On layer shape 1 give a Drop Shadow of 10/10/50/10 white, 
give all other layers a Drop Shadow 2/2/50/5 black.

Add your Artist © then crop and save.
This is only a guide feel free to use any other element you wish.

This tutorial was written by Maree(aka Falcon) on 14 October 2010
Any similarities to this tut or purely coincidental.


Saturday, October 9, 2010

Love is Sharing with Friends



Supplies Needed

Tube or Image of choice, I am using the fantastc artwork of Suzanne Woolcott
you can find her artwork here 
Scrapkit of choice, I am using a great kit called Berry Red by Scrapping Magic
you can find it here.scrappetizing
Font of choice 
Drop Shadow of choice.
Mask_84 by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 650 x 650.
Open ceejays_val2 flowerframe copy paste resize by 85 percent.
New layer select all copy paste ceejays_va12_paper, deselect then apply mask, merge group.
Select ceejays_val12_hanginggoldheart coy paste resize by 35 percent, 
place on let side of frame.Using your Freehand selection tool 
draw a small cirlce over hook, see below then hit delete.
Select your tubes copy paste place below frame layer resize if needed.
Selecct ceejays_va12_curledribbon copy paste resize  35 percent place at bottom of frame.
Select ceejays_va12_valbears copy paste resize 25 percent place at center bottom of frame.

Give all your layers a drop shadow of choice.
Add your Artist © and your name then crop and save.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 10 October 2010
Any similarities to this tutorial are purely coincidental

Lady Bug ♥



Supplies Needed
Tube or Image of choice 
Scrapkit I am using a beautiful kit called Sk8 Lady Bugs by Ariasparkle,
you can find it here.
Font: Freestyle Script
Drop Shadow of choice.
Mask_84 by Weescotslass
Remember to Save Often!!!

Let's begin

Open new image 700 x 700.
Select sk8-16 copy paste resize 20 percent. Click inside with Magic Wand 
copy paste sk8-paper6 resize by 20 perent Selections-Invert-hit Delete.
Effects Mura Meisters-clouds with these settings.
Move layer below frame.
Select sk8-4 copy paste resize 25 percent Image-Mirror then move below frame.
Select sk8-3 copy paste resize 20 percent place tbue on top of mushroom.
Select sk8-6 copy paste resize 25 percent place of left side of frame.
Select sk8-7 copy paste resize 15 percent place at bottom  off center of frame then duplicate 

Image-Mirror.
Select sk8-8 copy paste resize 18 percent place on right side of frame.
Select sk8-19 copy paste resize 15 percent place top left side of frame.
Select sk8-24 copy paste resize 20 percent then place between the flowers at bottom of frame.
New Layer select all copy paste sk8-paper 2, apply mask - Merge group.
Give all a Drop Shadow 2/2/50/5 except mask layer.
Add your Artist © and your name then crop and save if not Animating the butterfly.
This is only a guide and feel free to use any other element you wish.
Most of all have fun creating.

Animation

1. Open AS then click back to psp.
2. Using your Magic Wand click on white sections of the butterfly, holding down the shift key.
3. Effect -dbs flux - 45, then click center mix  button once. Ctrl+D- deselct then 
Edit-copy special-copy merged, paste as new animation in AS.
4. Back in Psp hit Undo button twice then this time hit mix button twice
 then Ctrl+D Copy Merged,  paste after Current frame.
5. Repeat step 4 but this time hit mix button 3 times.
6. Save as a Gif.
This tutorial was written by Maree (aka Falcon) on 10 October 2010
Any similarities to this tutorial are purely coincidental