CandyCane Babe ♥

Supplies Needed

 I am using the fantastic artwork of  Arthur Crow you can find  his artwork here at MPT

Scrap kit  I am using called  Crystalesx Christmas 2010 you can find it MPT.

Font:Minion Pro SmBd

Drop Shadow of choice.

Mask wsl_328 by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 650 x 650.

Foreground color set to #acf4b2 Background I used paper04, 

then set your Ellipse tool with these settings.

Draw out a circle convert to a raster layer, using Magic Wand click on outside of circle

(green section) then Adjust- Add/Remove Noise - Uniform-Noise 45

 click OK.Deselect.Ctrl+D.

Add your tube, I also used the flower swag that came with the tube, place it at bottom of circle.

Select cgd_christmas2010 bow 1 copy paste resize 45 percent place top right side of tube.

Open cgd_christmas 2010 mouse in a stocking 01 copy paste resize 32 percent . 

Then Image-Mirror place on right side of flower swag.

Open cgd_christmas candycane tag 01 and 02. Copy paste resize both 29 percent 

place around outside of circle, see tag.

Open cgd_christmas 2010 elf 03 copy paste resize 25 percent place left  of circle near the center

New layer select all copy paste cgd_christmas 2010 paper03 then apply Mask - Merge group.

Give all a Drop Shadow 2/2/50/5.

Add your Artist © and your name then crop and save.

This is only a guide and feel free to use any other element you wish.

Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 23 November 2010.

Any similarities to this tutorial are purely coincidental.

© Maree

Give Thanks ♥

Supplies Needed

I am using the fantastc artwork of Elias Chatzoudis   you can purchase  the artwork here MPT

Scrap kit I am using a great kit called Thanks Giving, you can find it here.

Font:Footlight

Drop Shadow of choice.

Mask wsl_285 by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 700 x 700.

New layer select all copy paste CHC_GiveThanks_paper6 into selection-select none.

Apply mask then merge group.

Select your tube copy paste on left side.

Open CHC_GiveThanks_element1 copy paste resize 15 percent place on lower right side.

Copy pasteC HC_GiveThanks_elements- Pumpkin-grapes-leaves-nuts and corn resize 

and place in front of the basket element.

 I duplicated the corn twice and placed them at an angle using the Pick tool.

Copy paste CHC_GiveThanks_turkey resize 13 percent place on top of basket element.

Copy paste CHC_GiveThanks_curlyrope resize 14 percent move to top of mask circle then dplicate

Open CHC_GiveThanks_Sign1 copy paste resize 12 percent place at top of ropes.

Select CHC_GiveThanks_Flowerbow1_DS copy paste resize 18 percent 

place at top of sign to hide hooks.

Open CHC_GiveThanks_Leaf 1,2 copy paste resize then place around the mask.

Give a Drop Shadow 2/2/50/5 to all.

Add your Artist © and your name then crop and save. 

This is only a guide and feel free to use any other element you wish.

Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 24 November 2010.

Any similarities to this tutorial are purely coincidental.

© Maree

Keep Dreaming ♥

Supplies Needed

Tube or Image of choice, I am using the fantastic artwork of Cedric Poulat 

you can find  the artwork at CILM.

Scrapkit of choice, I am using a great kit called Keep Dreaming by Flipp Designs,

you can find it here.

Font: Sudestada

Drop Shadow of choice.

Mask wsl_84 and 212 by 

Remember to Save Often!!!

Let's begin

Open new image 700 x 700.

New layer select all copy paste paper9 aply mask wsl_212, merge group.

Click inside with Magic wand new layer copy paste paper 9 try and

 match up the timber slats, move bleow mask.

Copy paste el62 resize by 23 percent. Add your tube then duplicate move this layer

 above frame element. Using your eraser, erase any parts outside the frame see tag..

Copy paste el_17 resize  21 percent place bottom of mask..

Copy paste el_55 resize 25 percent, duplicate Image-Mirror, move both to 

the top of the fence see tag.

Copy paste el-44 resize 21 percent duplicate then Image-Mirror move to the side of mask.

Copy paste el_43 resize 22 percent move to bottom left.

Open WA_1 copy paste resize to fit top of mask.

Copy paste el_09 resize 6 percent then using your pick tool move it so it

 placed at an angel on books.

New layer copy paste paper6 apply mask wsl_84, merge group.

Add your Artist © and your name then crop and save.

This is only a guide and feel free to use any other element you wish.

Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 19 November 2010

Any similarities to this tutorial are purely coincidental

© Maree

Reflections of My Soul

Supplies Needed

Tube or Image of choice, I am using the beautiful artwork of Zindy Neilson

 you can find  the artwork here

Scrapkit of choice, I am using a great kit called Soul Catcher by Lynn at Scrappin Emporium,

you can find it here.

Font MyDearWatson

Drop Shadow of choice.

Mask wsl_248 by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 600 x 600.

New layer copy paste paper 10 then apply mask.

Open frame 3 copy paste Image-Mirror, using Magic wand click inside frame

 and add your tube.Selections-Invert-hit Delete, move below frame.

Copy paste lace place at bottom of frame then using yourPick tool resize to fit frame.

Copy paste flower 4 resize 55 percent, move toleft of frame.

Copy paste flower 1 resize 45 percent move to side of flower 4.

Copy paste flower 5 resize 50 percent move to right of frame.

Copy paste candle resize 45 percent place between flowers, see tag.

Copy paste label heart resize 38 percent place top of frame right side.

Copy paste Butterfly 4 resize 35 percent place top of frame above.

Give all a light Drop shadow of choice. 

Add your Artist © and your name then crop and save.

This is only a guide and feel free to use any other element you wish.

Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 12 Novemeber 2010

Any similarities to this tutorial are purely coincidental

© Maree

Ivory Dreams ♥

Supplies Needed

Tube or Image of choice.

Scrapkit I am using a great kit called Ivory Rose by Lynn of Scrappers Emporium

,you can find it here.

Font: Kunstler Script

Drop Shadow of  choice

Mask_84 by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 650 x 650.

Open Ivory rose frame 3 copy paste, with Magic Wand click inside frame
 Selections-Modify-Expand by 4then copy paste Ivory Rose paper 6.
 Selections-Invert-hit delete, move below frame layer.

Open Ivory rose dress stand copy paste resize 35% lace on right side of frame.

Open Ivory rose ballet shoes copy pste resize 25% place left top of frame.

Open Ivory rose bow 1 copy paste resize 38% place above ballet shoes, see tag.

Open Ivory rose fan copy paste resize 25% position bottom of frame left side.

Open Ivory rose coursage copy paste resize 28% place center of fan.

Add your tube now, I used the poser that was included in kit.Resize 76%

Open Ivory rose letter copy paste resize 27% position near hand.

Then using eraser tool with these settings.

Carefully erase till you have the thumb showing, see tag.

Open Ivory rose deco copy paste resize 75% position so top is showing

over frame then duplicate-Image-mirror.

New layer select all copy Ivory rose paper 7 paste into selection.

Apply mask then merge group.Duplicate layer twice.

Give all a Drop Shadow 2/2/50/5 except your mask layers.

Add your Artist © and your name then crop and save.

This is only a guide and feel free to use any other element you wish.

Most of all have fun creating.

Animation Shop

Open AS then click back to psp

on 1st mask layer apply these settings

use again on 2/3 mask layers hitting the random seed button.

Now close mask layer 2/3 then

Edit-copy special-copy merged.

right click in As paste as new animation.

Repeat this again for the other 2 mask layers pasting after current frame.

This tutorial was written by Maree (aka Falcon) on 3 November 2010.

Any similarities to this tutorial are purely coincidental

Speed Demons ♥

Supplies Needed

Tube/s, I am using the fantastc artwork of Keith Garvey you can find  the artwork here at MPT

Scrap kit  I am using is So Punky by Rebellious Scraps,you can find it here.

Font:Agency FB 

Drop Shadow of choice.

Mask_Halloween 12  by Weescotslass

Remember to Save Often!!!

Let's begin

Open new image 650 x 650.

Select frame 1 copy paste resize 85 percent

Click inside frame with Magic Wand, select  paper 10 copy paste 

Selections-Invert-Delete move below frame layer.

Select wire copy paste above frame layer.

Select skull 2 copy paste resize by 78 percent move to top of frame.

Select handcuffs copy paste resize 45 percent place at top of frame 

then select Bow1 copy paste resize 38 percent place above handcuff.

Select motor cycle copy paste place at bottom of layer.

Add your selected tube/s place on either side of cycle.

I add elements cuff and zippo, but feel free to add any other element you want to.

Add a new layer then select Paper 5 copy paste paper4 as background.

Add your Artist © and your name then crop and save.

This is only a guide and feel free to use any other element you wish.

Most of all have fun creating.

This tutorial was written by Maree (aka Falcon) on 31 October

Any similarities to this tutorial are purely coincidental

© Maree